| Search results - "bracket" |
2nd Radiator Coolant Bottle and Starter Solenoid and Starter Circuit Relay249 viewsThe KLR250 coolant bottle displaced the starter solenoid and starter circuit relay. New brackets were made to hold the coolant bottle and the displaced electrics. The rear shock preload adjuster is still accessable using a socket and extension.jeffsaline
|
|
2nd Radiator Relocated displaced electrics244 viewsHere you can see some of the new locations for the displaced electrics. The flasher unit is now on the other side of the frame. With the fuel tank installed I have at least 3/8" clearance on all components. Tabs were added or moved on the stock coolant bottle bracket as needed. The stock CDI bracket was cut into multiple pieces for best fit of the components. Note the custom 195 degree stat housing on the side of the head.jeffsaline
|
|
KLR650 with a 2nd Radiator from a KLR250233 viewsThis is the result of installing a KLR250 right radiator on my KLR650. It displaced the coolant bottle and all the electrics on the CDI bracket. So far, with only cool to cold weather tests completed the performance is promising.jeffsaline
|
|
|
|
|
Headlight mounting brackets58 viewscra1g
|
|
CDI front mount58 viewsThe CDI is mounted under the dash.mike jra
|
|
Wiring and CDI bracket47 viewsThe brackets made to let me move the wiring and CDI on a dual rad set upmike jra
|
|
upper bracket205 viewsA simple bracket to add a mount point for the dual rad set up.mike jra
|
|
|
Rack for Ortieb Dry Saddlebag258 viewsThis rack keeps the Ortlieb Dry Saddlebag off the exhaust and also has a spot to fasten the bag to the rack to keep it from flopping. I think 5 KLRs are currently using this type rack. Two have had the rack crack just before the rear post. One was pretty new but used on some pretty tough roads. The other had over 10,000 miles on it and had recently been rebent after a hard fall.jeffsaline
|
|
|
| 21 files on 2 page(s) |
 |
1 | |
|
